Kids Furniture

Table and Chairs

This small set will be enjoyed greatly by the little ones in your household.

Instructions

• Its recommended that you first made a pattern of all parts on heavy craft paper or similar material and then place these patterns on your
  sheet of 1/2" plywood, to give you the most economic use of your
  material.
• When you have your layout made,begin to cut out the parts.
• Start assembly by nailing and gluing parts B&D together remem-
  bering to keep the better side of the plywood to the outside.
• Join legs to each other with parts A & C using glue and corrugated
  fasteners.
• Attach pieces of pine E with glue and nails, as per drawing.
• Glue and nail table top L in place.
• Nail and glue together parts for chairs, being careful to give support
  to legs when nailing.
• Set all nails and fill all nail holes and imperfections in plywood, including
  edges, with a wood filler. Sand all sharp edges so that there is no
  danger of splinters.
• Give coat of shellack and paint to your choice of colours.