Second piece of plywod
6. Measure for the first 48" cut, and cut across.
Measure for second cut, only 27" in, and cut only that far along the 48"
side.
Then from the other end, measure up 52 Vie" and cut to meet the second cut.
7. Measure for the long slots in the side and mattress supports, drill a hole big
enough for the saw blade to fit through, and cut out the long slots.
8. Measure for the feet cut-outs on the side, and cut out.
9. Measure for the side hooks, and carefully cut around them.
10. Measure sides for three levels of bolt holes and drill out with W bit.
11. Attach sides to back by hooking together . . . just to see how it feels to start
getting it together.