|
|
CRIB/DESK-PROCEDURE
First piece of plywood
1. Measure for first 48" cut, and cut out the back.
Measure for second cut, and cut across 48".
2. Measure for the side hooks, and carefully cut around
hooks.
3. Measure for slots in back and side and cut them out.
Start by drilling a hole
big enough for the saw blade to fit through near the
edge of the drawn diagram of
the slot.
4. Measure for the feet cut-outs in the back and side,
and cut them out.
5. On the back, measure for the thin slots, predrill
a hole for the saw blade, and
cut out the slots.
|
