TEDDY BEAR Making - Page 6

Legs

Align two leg sections, right sides together, pin
3in them, leaving an opening between the dots at each
m the sole to the straight edge of the leg, matching the
Llip the seam allowance on the leg edge if necessary to
it fit the curve of the sole. Stitch the sole and leg
ler. Clip the seam allowances along the inner curve of
?, and turn the leg right side out. Stuff the leg firmly
ave the curved end rather flat. Turn 'A" (6 mm) of
under along the opening, then slipstitch the opening
. Repeat for the other leg.